Designed for top installation, in any position, in liquid or vapor service lines. They are intended for long lines or branch piping where tank mounted excess flow valves cannot suffice.
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Item #

Brass or Steel

A. Inlet Connection NPT

C. Wrench Hex Flats

D. Effective Length (Approx.)

Approximate Closing Liquid Flows

N/A Brass N/A 1 in N/A 1-3/4 in N/A 3-15/16 in N/A 25 gpm/propane
N/A Steel N/A 1 in N/A 1-3/4 in N/A 3-15/16 in N/A 25 gpm/propane
N/A Brass N/A 1-1/2 in N/A 2-1/4 in N/A 4 in N/A 60 gpm/propane
N/A Brass N/A 2 in N/A 3 in N/A 4-9/16 in N/A 100 gpm/propane
N/A Steel N/A 2 in N/A 3 in N/A 4-9/16 in N/A 100 gpm/propane
N/A Brass N/A 2 in N/A 3 in N/A 4-9/16 in N/A 133 gpm/propane
N/A Steel N/A 2 in N/A 3 in N/A 4-9/16 in N/A 133 gpm/propane
N/A Steel N/A 3 in N/A 4 in N/A 6-17/32 in N/A 225 gpm/propane
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1