To handle 3/4" or 1" I.D. hose.
  • Standard N series narrow frame
  • Channel frame for heavy-duty applications must be specified.
  • Non sparking ratchet locks reel
  • Declutching arbor to prevent damage from reverse winding.
  • Standard inlet is 90° ball bearing swivel joint with 1" female NPT threads.
  • Standard outlet is 1" female NPT threads.
  • Other sizes and/or threads can be furnished and must be specified.
  • Pressures to 350 psi (24 bar).
  • Temperatures from -40 °F to +350 °F (-40 °C to +177 °C).
  • Consult factory for other pressures and temps.
  • Supplied 4-way roller assembly. Specify roller position.
Unit of Measure



N/A PB800 Series

Hose Capacity of Reel (1/2"/13 mm I.D., 0.94"/24 mm O.D.)

N/A 75 ft23 m

Hose Capacity of Reel (3/4"/19 mm I.D., 1.25"/33 mm O.D.)

N/A 100 ft30 m

Hose Capacity of Reel (1"/25 mm I.D., 1.5"/38 mm O.D.)

N/A 100 ft30 m

Approx. Weight Crank Rewind (Net)

N/A 137 lb62 kg

Approx. Weight Crank Rewind (Ship)

N/A 172 lb78 kg


N/A up to 350 psiup to 24 bar


N/A -40 to +350 ºF-40 to +177 ºC


N/A Specifications subject to change.
Others sizes, from standard components, available on request.
For optional locations of joint and spring motor placement - consult factory.
Be sure to check dimensions and weights prior to ordering.


N/A A Flexible Connector must be used between the inlet pipe and the inlet swivel joint.

Product Type

N/A Spring Rewind Reels


N/A Hannay

Note to Designers and Engineers

N/A The reels shown in this catalog are the standard of the industry.
These models reflect various installation and performance requirements.
The high quality of our standard steel construction is only the beginning.
Hannay Reels offers any size configuration to fit a defined space, and we construct many models of reels with aluminum or stainless steel. Specifically, we use 5000 and 6000 Series aluminum and 304 stainless steel in the manufacture of frames, discs, drums and internals as well as other structural components. This type of construction eliminates the need for maintenance repainting and part replacement due to rust or corrosion.
Please consult factory on any fuel handling questions. For a listing of accessories and components available on our standard reel models such as roller guides, switches, brakes and locks, etc., please refer to our Ordering & Accessory Guide H-0415-OA.