Oil & Gas   |   Measurement + Control Menu  
online catalog
Designed primarily for use on cylinder charging hoses to provide fast, convenient shut-off and fast opening.

These valves must be installed so that flow through the valve is in the opposite direction to that of a conventional globe valve. This allows the inlet flow to assist in closing the valve, and even more important, helps prevent the valve from being forced open by high pump pressure.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Body Material

Series

Inlet Connection

Outlet Connection

Flow at 1 psig (Cv) Pressure Drop

N/A Forged Brass N/A 7901T Series N/A 1/4" F. NPT N/A 1/4" F. NPT N/A 1.95 gpm/propane
N/A Ductile Iron N/A A7553A Series N/A 1/4" F. NPT N/A 1/4" F. NPT N/A 1.95 gpm/propane
N/A Forged Brass N/A 7901T Series N/A 3/8" F. NPT N/A 3/8" F. NPT N/A 1.95 gpm/propane
N/A Forged Brass N/A 7901T Series N/A 1/2" F. NPT N/A 1/4" F. NPT N/A 1.95 gpm/propane
N/A Forged Brass N/A 7901T Series N/A 1/2" F. NPT N/A 1/2" F. NPT N/A 1.95 gpm/propane
N/A Forged Brass N/A 7053T Series N/A 1/2" F. NPT N/A 1/2" F. NPT N/A 1.95 gpm/propane
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 
© 2014, Solares Florida Corporation  |  Site created by Thomas Web Solutions and Powered by Navigator Platform