Oil & Gas   |   Measurement + Control Menu  
online catalog
Designed specifically for vapor or liquid withdrawal service on DOT fork lift containers. Valves with 1.5 GPM closing flow are for use in small and medium size lift truck applications, while those with 2.6 GPM closing flow are for large lift trucks. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that cylinders capacity.

The integral excess flow valve found in all these service valves helps prevent excessive product loss in the event of fuel line rupture.

When installed for liquid withdrawal, the 9101P6 Series has provisions for attachment of a liquid withdrawal tube. The 9101P5 Series must be installed in containers that have provisions for a separate liquid withdrawal.

To insure proper functioning and maximum protection for integral excess flow valves, these service valves should be fully opened and backseated when in use.
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Item #

Container Connection

Service Connection

Liquid Withdrawal Connection

Closing Flow (LP-Gas)

N/A 3/4" M. NGT N/A 3/8" M. NPT N/A None N/A Liquid: 1.5 gpmVapor 25 psig Inlet: 430 SCFMVapor 100 psig Inlet: 900 SCFM
N/A 3/4" M. NGT N/A 3/8" M. NPT N/A None N/A Liquid: 2.6 gpmVapor 25 psig Inlet: 550 SCFMVapor 100 psig Inlet: 1050 SCFM
N/A 3/4" M. NGT N/A 3/8" M. NPT N/A 1/4" NPT N/A Liquid: 1.5 gpmVapor 25 psig Inlet: 430 SCFMVapor 100 psig Inlet: 900 SCFM
N/A 3/4" M. NGT N/A 3/8" M. NPT N/A 1/4" NPT N/A Liquid: 2.6 gpmVapor 25 psig Inlet: 550 SCFMVapor 100 psig Inlet: 1050 SCFM
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 
© 2014, Solares Florida Corporation  |  Site created by Thomas Web Solutions and Powered by Navigator Platform