Oil & Gas   |   Measurement + Control Menu  
online catalog
Ideal for use as a first stage regulator on any domestic size ASME or DOT container in propane gas installations requiring up to 1,500,000 BTU's per hour. The regulator is factory set to reduce container pressure to an intermediate pressure of approximately 10 PSIG.
Unit of Measure

Features

N/A

  • Compact design can be connected to a service valve using either a POL adapter or a RegO product pigtail.
  • Large threaded 3/8" F.NPT bonnet vent can easily be piped-away underground installations without the need of glue kits or extra adapters.
  • Non Adjustable
  • Large flow orifice resists freeze ups due to water concentration in LPG vapor.
  • Design provides for good flow regulation at both high and low container pressures.
  • Built in relief valve and travel stop comply with NFPA 58 over pressure requirements.
  • Incorporates 1/8" F.NPT downstream pressure tap for an easy inline check of the regulator's delivery pressure.
  • Molded diaphragm provides an o-ring type seal between the body and bonnet.
  • Body and bonnet are assembled in the USA using the unique, patented RegUlok seal system.
  • Fully painted in brilliant red for complete corrosion protection.
  • Mounting bracket available as an accessory: part number 2302-31.

Materials

Body Material

N/A Zinc

Bonnet Material

N/A Zinc

Spring Material

N/A Steel

Seat Disc Material

N/A Resilient Rubber

Diaphragm Material

N/A Integrated Fabric
Synthetic Rubber

Specifications

Inlet Connection

N/A 1/4" F. NPT

Outlet Connection

N/A 1/2" F. NPT

Orifice Size

N/A 1/4 in

Factory Delivery Pressure

N/A 10 psig

Bonnet Vent Position

N/A Over Outlet

Vapor Capacity BTU/hr. Propane

N/A 1500000

Product Type

N/A Compact First Stage Regulators

Manufacturer

N/A RegO
© 2014, Solares Florida Corporation  |  Site created by Thomas Web Solutions and Powered by Navigator Platform