Oil & Gas   |   Measurement + Control Menu  
online catalog
Designed specifically for use as a manual filler valve on anhydrous ammonia applicator tanks. This valve incorporates an integral back check valve.
Unit of Measure

Features

N/A

  • Positive seating back check valve opens for maximum flow at minimum pressure drop when filling - regardless of the type of coupling in which the valve is installed.
  • Back Check seat is fully contained in the tank coupling for maximum protection in the event of external damage to the valve.
  • Resilient seat disc assembly is fully contained on three sides for bubble-tight shut-off and long service life.
  • "V"-ring spring-loaded stem seal design requires no repacking or field adjustment.
  • Specially machined break-away groove beneath ACME threads will shear-off with excessive pull on the hose and leave the valve body intact.
  • Plugged 1/4" NPT boss accommodates vent valve or hydrostatic relief valve.

Materials

Body Material

N/A Ductile Iron

Bonnet Material

N/A Steel

"V" Ring Material

N/A PTFE

Stem Material

N/A Stainless Steel

Seat Disc Material

N/A Resilient Synthetic Rubber

Back Check Valve Material

N/A Stainless Steel Steel Synthetic Rubber

Spring Material

N/A Stainless Steel

Specifications

Inlet Connection

N/A 1-1/4 in

Filling Connection

N/A 1-3/4 in

Filling Capacity at 20 psig Pressure Drop

N/A 95 gpm/NH3

Accessories Hydrostatic Relief Valve

N/A SS8001J

Accessories Vent Valve

N/A TSS3169

Note

N/A Determined at 9.5 to 12 PSIG differential.
Determined at 100 PSIG inlet.

Product Type

N/A Multipurpose Valves

Manufacturer

N/A RegO
© 2014, Solares Florida Corporation  |  Site created by Thomas Web Solutions and Powered by Navigator Platform