Oil & Gas   |   Measurement + Control Menu  
online catalog
  • Cylinder Valve for Liquid Withdrawal 9107K8A

    Equipped with excess flow valves and liquid withdrawal tubes, they are designed for liquid withdrawal of DOT cylinders up to 100 lbs. propane capacity. They are most often used with heavy BTU loads found in industrial uses.

  • Cylinder Valve for RV and Small ASME System Vapor Withdrawal 9106CO

    Designed especially for vapor withdrawal service in small ASME containers with surface area up to 23.8 square feet. UL flow capacity is 645 SCFM/air.

  • Heavy-Duty Cylinder Valves for Vapor Withdrawal 9103 Series

    This heavy duty cylinder valve is designed for vapor withdrawal of DOT cylinders up to 100 lbs. propane capacity. It is used in domestic hookups, and industrial commercial installations.

  • Tamper-Resistant Cylinder Valve with Outlet Check for Vapor Withdrawal 9103T9F

    This valve is designed for vapor withdrawal from and protection of DOT cylinders up to 100 lbs. propane capacity. Ideal for cylinders used in the field by construction crews, utility repair men and plumbers.

  • "Dual" Cylinder Valve for Simultaneous Liquid and Vapor Withdrawal 8556

    This dual cylinder valve was designed especially for industrial uses. It increases the cylinder’s flexibility by permitting DOT cylinders up to 100 lbs. propane capacity to be used interchangeably or simultaneously for either liquid or vapor withdrawal.

  • Service Valves for ASME and DOT Containers or Fuel Line Applications 9101D Series

    Designed for vapor withdrawal service on ASME and DOT containers or in fuel line applications. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that container’s capacity.

  • Service Valves for ASME Motor Fuel Containers 901C Series

    Designed specifically for vapor or liquid withdrawal service on ASME motor fuel containers. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that container’s capacity.

    The integral excess flow valve found in all these service valves helps prevent excessive product loss in the event of fuel line rupture.

    When installed for liquid withdrawal, the 9101H6 has provisions for attachment of a liquid withdrawal tube. All other valves must be installed in containers that have provisions for a separate liquid withdrawal.

    To insure proper functioning and maximum protection from integral excess flow valves, these service valves should be fully opened and backseated when in use.

  • Service Valves for DOT Fork Lift Containers 9101P5 Series

    Designed specifically for vapor or liquid withdrawal service on DOT fork lift containers. Valves with 1.5 GPM closing flow are for use in small and medium size lift truck applications, while those with 2.6 GPM closing flow are for large lift trucks. Since none of these valves have an integral pressure relief valve, they may only be used as an accessory valve on containers that have an independent pressure relief valve sufficient for that cylinders capacity.

    The integral excess flow valve found in all these service valves helps prevent excessive product loss in the event of fuel line rupture.

    When installed for liquid withdrawal, the 9101P6 Series has provisions for attachment of a liquid withdrawal tube. The 9101P5 Series must be installed in containers that have provisions for a separate liquid withdrawal.

    To insure proper functioning and maximum protection for integral excess flow valves, these service valves should be fully opened and backseated when in use.

© 2014, Solares Florida Corporation  |  Site created by Thomas Web Solutions and Powered by Navigator Platform