Check, Filler, and Multipurpose Valves on Solares Florida Corporation

Solares LPGas
& NH₃ ProductsPressure Regulator Pipe, Valve,
& Accessories LPG Pumps (Liquefied Gas Pumps)Gas Compressors Measurement and
Control Transfer Hose
& Rewind Reels Steel Storage
Cylinders & Tanks

Solares Florida Co. Terminal Automation Products ...coming soon!


All Categories > Pipe, Valve, & Accessories > Check, Filler, and Multipurpose Valves


	Check, Filler, and Multipurpose Valves
	Click on a Product to view details.


		Multipurpose Valve for Filling of NH₃ Containers (A8016DBC) Designed specifically for use as a manual filler valve on anhydrous ammonia applicator tanks. This valve incorporates an integral back check valve.




		Multipurpose Valve for Filling of NH₃ Containers (A8016DP) Designed specifically for use as a manual valve or vapor equalizing valve on anhydrous ammonia applicator and nurse tanks. This valve incorporates an integral excess flow valve. When product is required, the valve must completely open and backseated to allow the excess flow valve to function properly as explained in the excess flow section of this catalog.




		Multipurpose Valves for Liquid Withdrawal of LP-Gas and NH₃ Containers (A8017D & A8020D) (4) Designed especially for use as a high capacity liquid withdrawal valve on LP-Gas and anhydrous ammonia containers. These valves incorporate an integral excess flow valve. When product is required, the valve must be completely open and backseated to allow the excess flow valve to function properly as explained in the excess flow valve section of this catalog. The A8017DH is equipped with a soft seated automatic differential back pressure check valve in the seat disc assembly. This allows any pressure build up in the liquid transfer line in excess of 10-15 PSIG above the container pressure to flow back into the container. The transfer hose is protected against excessive liquid or vapor pressure entrapment, which adds materially ...




		Multipurpose Valve for Filling and Liquid Transfer of NH₃ Containers (A8018DP) Designed primarily for use as a combination filler and liquid withdrawal valve on three-opening applicator tanks or on nurse tanks. This valve incorporates an integral excess flow valve. When product is required, the valve must be completely open and backseated to allow the excess flow valve to function properly as explained in the excess flow valve section of this catalog.




		Double Check Vapor Equalizing Valves for ASME and DOT Containers (7573 Series and 3183AC) (3) Designed to facilitate loading operations by providing equalization of pressures in the supply and storage containers. The supplementary excess flow valve closes when the flow from the container being filled exceeds a predetermined rate. The 7573 Series is designed for use in bulk delivery systems and motor fuel containers. The 3183AC is designed for use in delivery trucks and other large containers.




		Single Check Vapor Equalizing Valves for ASME and DOT Containers with Supplementary Excess Flow Valves (2) Designed for use with RegO® Excess Flow Valves to facilitate loading operations by providing equalization of pressures in the supply and storage containers. Also may be used as a spare or replacement part. These vapor equalizing valves must never be installed directly into container couplings. They must be used with the appropriate excess flow valve to comply with NFPA Pamphlet #58.




		New 3" Soft Seat Back Check Valve (A3198S) Designed to provide protection in a container opening when desired flow is always into the container. May be used on in-line applications where flow must be limited to one direction.




		Back Pressure Valves for Container or Line Applications (3146 Series, 3176 Series, A3186, A3187S, A3196, and A3276BC) (9) Designed to provide protection of a container opening when desired flow is always into the vessel. May be used in line applications where flow must be limited to one direction. When used with the appropriate single check filler valve, the combination forms a double check filler valve suitable for use in filling of bulk storage tanks.




		Double-Check Filler Valves for Large Motor Fuel and ASME Tanks (6579 and 7579 Series) (5) Designed to provide fast filling of large motor fuel and ASME domestic tanks. The 6579 Series incorporates a swing-away lower check which greatly reduces pressure drop across the valve. This lower pressure drop promotes faster filling rates and greater efficiency resulting in more profitable operations.




		Double Check Filler Valves for Forklift, Motor Fuel and RV Tanks (7647 Series) (5) Designed to provide fast filling of forklift, motor fuel, and recreational vehicle tanks.




		Double Check Filler Valves for Delivery Truck Tanks and Large Storage Containers (7579S, 6587EC and 3197C) (3) Designed to provide fast filling of bobtails, transports and large bulk storage tanks. The 6587EC incorporates a swing-away lower check which greatly reduces pressure drop across the valve. This lower pressure drop promotes faster filling rates and greater efficiency resulting in more profitable operations.




		Single Check Filler Valves for Storage Tanks with Supplementary Back Check Valves (3174C, 3194C and 6584C) (3) Designed for use with RegO® Back Check Valves to provide fast filling of bulk storage tanks. Also may be used as a spare or replacement part. These single check filler valves must never be installed directly into container couplings. They must be used with the appropriate back check valve to comply with NFPA Pamphlet #58.




		ASME Multivalves® for Vapor Withdrawal (G8475R Series) (2) These Multivalves® are designed for use in single opening ASME containers equipped with a 2 1/2" M. NPT riser. They can be used with underground ASME containers up to 639 sq. ft. surface area, and above ground ASME containers up to 192 sq. ft. surface area. A separate opening is required for liquid withdrawal. The MultiBonnet® is standard on this valve. With the service valve closed the pressure port will be isolated from the container. This will allow a high pressure leak test to be conducted without disconnecting the pigtail from the service valve.




		ASME Multivalves® for Vapor Withdrawal (8593AR) These Multivalves® provide vapor withdrawal and filling of ASME containers. A separate pressure relief valve is required in addition to this valve. The MultiBonnet® is standard on this valve.




		DOT Multivalve® for Liquid Withdrawal (8555DL) These Multivalves® permit liquid withdrawal from DOT cylinders with up to 100 lbs. propane capacity. They eliminate unnecessary cylinder handling when servicing high volume loads and allow on-site filling into the vapor space without interrupting gas service.




		DOT Multivalves® for Vapor Withdrawal (6555R, 8555D and 8555R Series) (7) These Multivalves® permit vapor withdrawal. They allow for container filling without interrupting gas service. The 6555R Series is designed for ASME containers with up to 25 ft² surface area or 60 gallons water capacity. The 8555D and 8555R Series are designed for DOT cylinders with up to 200 lbs. propane capacity.




		DOT and ASME Multivalves® for Vapor Withdrawal (6532, 6533, 6542 and 6543 Series) (12) These Multivalves® permit vapor withdrawal from ASME containers up to 50 sq. ft. surface area and DOT containers up to 420 lbs. propane capacity. They allow on-site cylinder filling without interrupting gas service.




		ASME Multivalves® for Vapor Withdrawal (7556R) These compact Multivalves® are especially suited for vapor withdrawal of ASME containers where compact groupings of components are necessary. Separate filler valves and pressure relief valves are required.




		Combination Valve for Bulk Storage Containers (A2805C) Designed for installation on bulk storage containers, this valve combines a pressure gauge mounting and provision for a fixed tube liquid level gauge. The shut-off valve prevents the pressure gauge from being subjected to constant pressure, thereby prolonging its life and accuracy. The valve may be closed, and the vent valve opened to vent pressure from the gauge to permit replacement. For fixed liquid level gauging, the valve can be mounted at the maximum permitted filling level. When equipped with a dip tube threaded 1/8" M. NPT, it can be installed at any convenient level.